About

How to Remove a Shower Head

Most people find it a difficult task when it comes to removing a showerhead. Your showerhead may be broken, need a replacement or removed for cleaning. You may also want how to remove ​a shower head to replace with a low-flow model in order to save water. However, removing may not work that easily to some people. All you need is to learn how to do it.

Rust and hard water deposits may lock the thread of your showerhead making it impossible to turn it by hand. Do not worry! A wrench is there to help you on this. You can also use it when replacing a shower arm. You don’t have to call a plumber again. In this post, we will learn about how to remove a showerhead.

Preparing to Remove Your Shower Head

​Determine why a shower head is stuck. There must be a reason to why you want to remove your shower head. A perfect showerhead should be removed easily using your hands. That is when we say it has an excellent condition. If this is not possible, then you can use other methods. Nevertheless, before making any further step to remove a shower head, remember to evaluate why your shower head is stuck.

  • Look for signs of rust. This is very important. Is there a copper colored or orange ring around your showerhead? In most cases, this happens on the shower arm.
  • Search for signs of any mineral build-up. A white ring around you shower can be one of the signs. This happens where the shower arm attaches the shower head.
  • If there no signs of mineral build-up and rust, there is a high probability that your shower head is somehow attached too tightly.

​Turn off the water supply. Usually, it is not necessary to turn off the water if you decide to remove your shower head by hand. However, removing a stuck shower head presents more challenges and risks. That is why you are advised to close the water source. The water valves can be in one or two places. These are:

  • Under your bathroom sink.
  • Also, in the basement, just directly below a tub.

​Prepare your work space. During this whole process, you will use the tools and chemicals that are needed to damage your bathtub or shower. To prevent damage, just cover the floor of the bathroom or tub using a thick work cover. Also, you will handle some parts and small pieces. To avoid losing parts, place a cloth in the sink.

Remove your Stuck Shower Head

​Use a pair of pliers/wrench to remove your shower head. In most cases, simple tools will help you are starting to perform this activity. Good examples are pliers and wrenches that will help you to loosen you’re the stuck shower head. However, if one method fails, try the alternative method or next method.

  • Cover the mounting connector or the sanitary valve/plumbing nut with the old cloth so as to protect the metal on the showerhead.
  • Grip the nut or the connector with a pair of pliers or a wrench.
  • First, turn pliers or wrench in a clockwise direction. With this, you are trying to break mineral deposits or rust.
  • Turn your tool counterclockwise to unzip and remove your shower head.

​Apply calcium, a rust and lime remover on your shower head. Treating the mineral build-up and rust with chemicals may help your connector or nut to loosen.

  • Read the instructions well on a bottle of rust, lime remover, and calcium. As instructed apply the product.
  • Allow this product to sit and work in the allotted time.
  • Rub the product using a wire brush, remove rust, lime and calcium into the process.
  • Clear or wipe both the shower arm and shower head clean.

​Apply penetrating lubricant to your shower head. The penetrating lubricants such as Liquid Wrench and, WD-40 can work wonders when it comes to this. Lubricants will ensure an easier task for you.

  • Apply a layer of the penetrating lubricant directly to the nut or connector. Stay back and wait for at least 2-3 hours.
  • Apply a second layer of the penetrating lubricant directly to the nut or connector. Wait for a few hours (2-3 hours)
  • Cover the nut or connector with a cloth.
  • Grasp the fixture or the nut using your wrench or plier and try to loosen your shower head.

After Removing Clean Your Shower Head

After removing your shower head, you need to clean your showerhead so as to remove any mineral, dirt and other layers.

​Soak your shower head in the vinegar bath overnight. After removing the shower head, carefully clean the fixture in order to remove rust or mineral deposits.

  • Place your shower head into a small basin or container.
  • Pour the white distilled vinegar into this small container until your shower head is fully submerged.
  • Let the shower head soak for 12 hours or overnight.
  • Let the shower head rise by running it under the cold tap water.

​Remove residual rust or mineral buildup from your shower head. After the vinegar bath, examine your shower head for any signs of rust or accumulation of minerals. If mineral build up or rust is visible, apply calcium, a rust and lime remover to your shower head. Use the steel to scrub the product before using the equipment.

  • Always follow all the instructions listed on this product.

​Remove old tape, mineral build up or rust from treads of the shower arm. Do not re-attach your shower head to the unclean shower arm.

  • Pull the tape of your old plumber away from the treads shower arm. If necessary, use a wire brush or an exact knife.
  • If mineral build up or rust is visible, apply calcium, lime remover and rust to your shower head.
  • Leave the product at least for some hours.
  • Use your wire brush to scrub away, calcium, rust, and lime to remove the product.
  • With your old cloth, just wipe your shower arm.

Reasons for removing a shower head

You may remove your shower head for many reasons. This after the equipment fails to work or to work slowly. To suit your needs and satisfaction just make sure that you are removing it with a varied reason.  

Here are the common reasons for removing a shower head:

• Mineral construction – If there are mineral deposits, all that you need is to remove your shower head to clean or replace it. Mineral deposits may cause clogs as well as reduce water pressure.

• Age. Age is gold as they say. However, older shower heads may leak or rust. For this reason, you need to remove the shower arm for more repair. Remember that, main deterioration may reduce pressure thus causing unnecessary leakage.

• Style. Older styles may be seen to collide with newer version bathroom decorations. This will make you remove your shower head, especially after the renovation.

• Efficiency. Old or rusted shower heads may reduce the usability and efficiency of your bathroom or showering. This will make you remove your shower head when finding the solution.

There you are! With the above article, you will find it easy how to remove ​a shower head without any struggle. Let your equipment work as per your expectation. With this, you will have a reason to smile. Try this, and you will thank me.

Join The Discussion